Sony » VGN-CR (Black) » VGNCR140E

Sony » VGN-CR (Black) » VGNCR140E LCD Screen Replacement Guide

How to Remove Replace Install your Sony VGN-CR (Black) VGNCR140E Laptop LCD Screen

1. Remove the rubber covers from you Sony VGNCR140E LCD Screen.

2. Use a philips head screw driver to remove the screws.

3. Pry off the Sony VGNCR140E Plastic LCD bezel.

4. Remove the screws from the side of the LCD hinges.

5. Handle the Sony VGNCR140E LCD hinges with care as they are delicate.

6. Place the Sony VGNCR140E LCD Screen down on its front and remove the LCD ribbon cable from the LCD.

7. Unplug and remove the Sony VGNCR140E Inverter from the LCD.

8. You are now ready to replace and install your new Sony VGNCR140E LCD Screen.

9. Recconnect back your Sony VGNCR140E Inverter LCD Cable and Hinges.

10. Place the screws back in and secure the Plastic LCD Bezel back in place.